Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: glove box switch

  1. #1

    Default glove box switch

    is this a stock switch? its in the glove box.

  2. #2
    Join Date
    Oct 2006
    Location
    Port Orchard, Wash.
    Posts
    4,572

    Default

    I can't see the picture on my PDA here for some reason, but I've never seen any switch in the glovebox before.
    -- Tim Taylor


  3. #3

    Default

    Thanks, I didn't think is was but since this is my first m715 I wasn't sure

  4. #4
    Join Date
    Oct 2006
    Location
    Port Orchard, Wash.
    Posts
    4,572

    Default

    Oh... now it showed up. That looks like a stock ignition power switch that would usually be found below the 3-lever light switch on the dash. What's it wired to?
    -- Tim Taylor


  5. #5

    Default

    The stock ignition switch is where it should be. The wires conected to this switch are cut so I'm not sure where they would go to.

  6. #6
    Join Date
    May 2008
    Location
    Kansas City, MO
    Posts
    399

    Default

    Looks like a battery cut-off to me.
    1967 M715 w/w #11812

  7. #7
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    I would bet its someones added battery cutoff switch too...NOT stock.

  8. #8
    Join Date
    Jan 2007
    Location
    Fort Smith, Arkansas
    Posts
    911

    Default

    Not stock but not a bad idea for security.

  9. #9
    Join Date
    Oct 2006
    Location
    Port Orchard, Wash.
    Posts
    4,572

    Default

    I will probably be doing something similar with mine, only putting a keyed switch in the glovebox and putting a stock switch back on the dash panel.
    -- Tim Taylor


  10. #10

    Default

    As do many former brush fire trucks, my water truck M715 has a cutoff switch that I need to move to a less conspicuous location for anti theft purposes.

Similar Threads

  1. Glove Box Door Push Button
    By azrolling in forum Open Discussion
    Replies: 3
    Last Post: March 15th, 2009, 12:01 AM
  2. Switch Assemblies?
    By Snuffy in forum Open Discussion
    Replies: 4
    Last Post: December 28th, 2008, 09:32 PM
  3. Glove box writing
    By Chop Parlor in forum Open Discussion
    Replies: 5
    Last Post: May 28th, 2008, 10:53 PM
  4. 3-lever switch
    By tngreenmachine in forum Stock Tech
    Replies: 11
    Last Post: October 29th, 2007, 11:58 AM
  5. light switch
    By foodstamp in forum Stock Tech
    Replies: 1
    Last Post: October 29th, 2007, 12:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024