fuel fill hose

[coy1]

This is my first post. GREAT website! I have a 68 M715 with 8000K original mi.
Most things work. I need to replace fuel fill hose. I am cleaning fuel system from a to z. Anyone know where I could obtain the rubber filler hose. THANKS!

[Jester]

You talking about the rubber j-bend filler neck? P/N 11657393

Fuel tank rubber filler elbow

[coy1]

Yes sir

[Jester]

the link in my above will tell you where to get one

[coy1]

thankyou very much. I will get some pictures out.

[randyscycle]

Memphis equipment has them and in a new rubber material too, so hopefully they should last longer and not be subject to the UV damage like the old ones always seemed to.

The last one I bought was around $75.....

[Arch8]

Hi coy1 ! It just happens to be that we share a lot in common. I just got my 68 too and am in the process of obtaining the same parts as you are. I plan to remove, clean, inspect and line the tank, replace the fuel lines, rebuild the fuel pump (if possible) and rebuild the carb as well. We should keep in touch.

[coy1]

Hi Arch 8! Looking forward to working with you. I dropped the tank today only to discover that the Fuel sender had rusted off and the tank is a ball of rust.I plan to take the tank to a radiator shop for cleaning. I just got the fuel pump diaphram kit in and need to rebuild the carb. I intend to install a Racor fuler filter with a metal bowl and petcock near the fuel tank. The Racor filter will filter down to 2 microns. They work very well on boats. I will use the metal bowl rather than the plastic for safety purposes. We will stay in touch. Good Luck!