Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: 230 fuel pump

  1. #1

    Default 230 fuel pump

    Mine is toast, looking for a replacement.
    1967 & 1968 M715
    The ChopTop

  2. #2
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    Couple of options...

    1. Rebuild kit from http://www.then-now.com/

    2. Replacement pump from Autozone withOUT the vacuum unit...so you would have to do something about the wipers like go to electric...part number is 6510...last I checked it was $27.99.

    3. You can modify a cheap small block mopar pump to do the same as the stock pump withOUT the vacuum unit...heres how:

    http://www.m715zone.com/vb/view.php?pg=mopar_fuelpump


    You can try the mil surplus guys...not sure that they have any...wouldnt pay for an NOS one and think it would work...if you can find one even. I would bet it would need rebuilt quickly.
    Last edited by brute4c; April 20th, 2007 at 04:17 PM. Reason: spelling

  3. #3

    Default

    Thank you for the reply and options. I'm going to order the rebuild kit unless somebody thinks one of the other options is a better avenue of repair.
    1967 & 1968 M715
    The ChopTop

  4. #4

    Default

    Update:
    I got the Autozone replacement pump.

    When I removed the original pump I found the spring had broken. I discovered a couple of pieces stuck to the pump and in the block cavity, but where did the rest go/end up and what trouble could it have caused?
    1967 & 1968 M715
    The ChopTop

  5. #5
    Join Date
    Sep 1998
    Location
    North Central Wisconsin
    Posts
    11,520

    Default

    I think it would be stuck in the bottom of the timing cover...unless it could snake through the little drain to the oil pan...

  6. #6
    Join Date
    Oct 2006
    Location
    Port Orchard, Wash.
    Posts
    4,572

    Default

    I'm moving this to the Stock forum. Useful for rebuild kit info and wiper pump alternative as well as the lost parts tech!

    Be sure to tell us where the missing parts turn up, Krek!
    -- Tim Taylor


  7. #7

    Default

    I still can't get it to run off the tank. I can add fuel to the carb (or carb cleaner) and it will run until it goes dry. As an added bonus it runs without any (new) unusual noises.

    My father-in-law is coming over tomorrow night to help me disassemble the carb, he thinks the needle valve is clogged. Sound logical?

    After that I need to find out why it is suddenly leaking coolant from the upper radiator hose (thermostat?) and then I can start chasing the bits of fuel pump spring.
    1967 & 1968 M715
    The ChopTop

  8. #8

    Default

    Are you talking about the little spring that goes on the arm? Mine was long gone when I rebuilt the fuel pump and the pump had been bypassed for at least 15 years. Either someone fished on the spring way back when, it found a happy place to live in my engine for those 15 years, or it never had one to begin with.

    Have you checked the fuel flow out of the pump? If you don't have a pressure gauge grab one of those cheesey clear fuel filters and at least you'll be able to tell if the fuel is moving.

  9. #9

    Default

    My new Autozone fuel pump isn't getting the job done either.

    Does someone make an 24v electric fuel pump or is there a way to use a 12v pump?
    1967 & 1968 M715
    The ChopTop

  10. #10

    Default

    Napa has 24v pumps if you want to go that route. I think you'd be better off just rebuilding the stock pump though. Cheap and easy.

Similar Threads

  1. Fuel Pump
    By gargemel_622 in forum Stock Tech
    Replies: 5
    Last Post: September 7th, 2009, 12:10 PM
  2. need fuel civy fuel pump #s
    By jpsnblood in forum Stock Tech
    Replies: 6
    Last Post: June 24th, 2009, 09:00 PM
  3. Fuel pump ?
    By ryanroo in forum Stock Tech
    Replies: 6
    Last Post: October 7th, 2008, 09:47 PM
  4. fuel pump doesn't pump.
    By sf38a1 in forum Stock Tech
    Replies: 10
    Last Post: April 11th, 2008, 08:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Site Upgrade, Design Modifications & Administrative Support by:
Palm River Enterprises LLC, IT Solutions
President: Tom King, User ID=teking
This site is owned and operated by:
M715 Zone, LLC
President: Jon Schmidt, User ID=brute4c


If you have any suggestions, comments, problems or questions, contact:  brute4c@m715zone.com
Use of this site means you understand and agree to our TERMS OF USE

Copyright Notice:
This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com

Copyright 1998-2024