Printable View
We finally are to the point of putting wires onto the truck for Sermis. This is my 5th or 6th M series truck to pretty much do all the wires on. Besides the lighting diagram here on the Zone. I have found this listing of what number wire does what to be something I have to have when doing this:
https://olive-drab.com/od_mseries_circuits.php
I know I have posted this before, but figured it was worth putting out there again.
Good information. Even though I don't have a 151 anymore I've kept the one manual because it list the complete schematic wiring harness for both the A1 and the A2 and all the numbering. Take the A2 harness and you have the same layout for an M37, a M715, an M35 etc. Someday when I've got nothing going on I'll make a PDF of the schematic and call it generic MV wiring harness.
That sounds like a great idea...hope you find the time one day...