Cummins 6bt engine mount

What have you used to mount your 6bt between the frame rail ?? Does any motor mount may fit or any cummins parts number ?? Mine is from a 93 dodge w350 and having chevy style motor mount .... I know that for sure it will need fabricating a mount ... but between the mount and the motor ??

Thanks

I used 3rd generation motor mounts. The frame mounts I made - Very easy.

http://img509.imageshack.us/img509/419/dsc03975vo4.jpg

WOW almost too easy ..... so both side bolt right to the motor this way ?? Third gen ... start in 99 to ??

I'm working on putting a 93 cummins in my 715 and the 3rd gen design is what I am using too. Got a set on ebay for 50 bucks I think and they bolt right on. They use three bolts instead of the four that came stock. Pretty easy to fab mounts off the frame, just some flat stock and a welder.

Nice .... will started looking for those kinds of mounts !!! THANKS a lot !!!

This is mostly 4BT stuff, but might give you some ideas.

http://www.4btswaps.com/forum/showthread.php?t=26

Quote:

---

Originally Posted by glenn

I'm working on putting a 93 cummins in my 715 and the 3rd gen design is what I am using too. Got a set on ebay for 50 bucks I think and they bolt right on. They use three bolts instead of the four that came stock. Pretty easy to fab mounts off the frame, just some flat stock and a welder.

---

I thought the ones that used three bolts were the 2nd gen ones. Mine have 4 mounting holes on both sides :confused:

Quote:

---

Originally Posted by Mikel

I thought the ones that used three bolts were the 2nd gen ones. Mine have 4 mounting holes on both sides :confused:

---

So your's is the same as the picture but 4 bolts instead of three ?? Are you sure it's from a second gen 6bt ??

I might have gotten my mounts from a 2nd gen motor. Can't remember which year they are supposed to fit. They are the same style like in the picture but only have three bolts that hold them to the block.

OK it should be from a second gen ..

BTW the third genreation used two different engine mount ... the one with the round bushing and the other fit a sandwiched chevy style rubber ... both are from the third gen.

http://www.4btswaps.com/forum/attach...2&d=1199576667

Quote:

---

Originally Posted by Kamikaze12volts

OK it should be from a second gen ..

BTW the third genreation used two different engine mount ... the one with the round bushing and the other fit a sandwiched chevy style rubber ... both are from the third gen.

http://www.4btswaps.com/forum/attach...2&d=1199576667

---

I thought the sandwich style was 1st gen only :confused:

my first gen look like a big rubber with a stud on the middle of it. Will look for at least the 2nd gen .... Thanks for the help !!!

Quote:

---

Originally Posted by Mikel

I thought the sandwich style was 1st gen only :confused:

---

Never mind. The picture didn't show the first time. 1st gen mounts are defenately different.