Bought gaskets..but.

They did not work.

I finally found the napa part number on here for the oil pan gasket, but napa said they dont carry that number anymore but could cross reference it.

I looked up all the old jeeps that ran the civvy 230 tornado.. BUt this gasket kit that discount auto had in stock is no where near what is under the kaiser.:confused:

So the part number I found out on here is NGA OS20927

This is what I have that doesnt work.
http://www.napaonline.com/MasterPage...Pan+Gasket+Set

Im going to take the number i found on here and try to have them cross it up.. Going to be replacing gaskets and hoses and what nots to get this hopefully to a non leaking point for a while.. im loosing a LOT of oil lately.

Also.. I got a brand new valve cover gasket from vintage and within a month of being installed, its dry cracking along each bend!!:eek: Whats the deal?

give AB Linn a call. I bought some gaskets last year and had no trouble with them.

AB Linn?? Im new and never heard of him/her/shop?

Ooops, just did a search for ab linn..thanks again! didnt know.

I try him first for most stock parts. He has been the best to deal with by far. Very fair, and great service. My .02/100

The v/c gasket on my truck is nothing but cracks yet it hasnt leaked.

I agree with all points

AB Linn, first stop.

NOS V/C gaskets junk but won't leak.

Napa is hit and miss on the right parts.

yeah ab linn wasnt much of help.. only has reflectors and a temp sending unit..


However i took the number for the gasket from this site and napa cross referenced it to something so i ordered it..if its not it..then im gonna have to find something else.

I bought my last gasket set from whiteowl.com
It's been a while, though.

Another source on Ebay, but pricey. I've never bought from them but might consider if you can't get the gasket from another source.

Robert

Rear main seal:

http://cgi.ebay.com/ebaymotors/1962-...spagenameZWD1V

Pan gasket:

http://cgi.ebay.com/ebaymotors/1962-...spagenameZWD1V

Don't over tighten the valve cover gasket either, I got a little ambitious on one and cut into it enough to exaggerated the leak I was trying to stop.

well i no longer have leaks from the new gasket..just couldnt believe its allready craking..oh well..thanks again for the ebay links.. I booked marked them..If napa gets the wrong one then ill be ordering that one..

Thanks again for all the help

Good Luck on finding a pan gasket or rear seal at NAPA or ay other auto parts store, as of begining of 2007 , Fel Pro and Victor discountinued supplying the pan and rear seal. I called the Fel Pro, Victor, they told me they were discountinued. I just bought a rear seal, and pan gasket in 2006, for the 725, If I new they were going to stop making them I would have got Two, The engine gasket set is also discountinued, It sold for 85.00, Now your lucky if you can find it for 250.00, I did see one on ebay for I belive around 150.00.

Well I gave napa the part number from this forum and they cross referenced it and found it. They had to order it and pay for shipping but it appears to be the right one. If it is Ill post up the number for it.

according to this link i was given
http://cgi.ebay.com/ebaymotors/1962-...spagenameZWD1V

Thats the correct gasket set.

What I got is the exact thing from FELPRO.
Ill have to post the part number tomorrow. I cant find the reciept. BUT yes I think I have the right ones.

Did you ever find the gasket yet?

oh yeah..the felpro one I have is the correct one. Ill get #'s posted tomorrow.

I bought the gasket set at Pepboy (Special order Part # FB8023SKV 8384432) This was several years ago and the cost back then was $89. It was for the civilian engine so the timing cover gasket and carb gasket wouldn't work but I believe the rest was OK. I had the same experience you had with the valve cover gasket also. Have had very good service from AB Linn also...Good Luck!

Sargetom

well, i just bought the oil pan gasket.. I think it was only around 25 bucks with special shippin.

Quote:

---

Originally Posted by SouthernM715

..if its not it..then im gonna have to find something else.

---

I may have enough gasket material left over from the Mite's carb rebuild that you could make a new gasket.