tie rod end revisit

all,

I'm in need of tie rod ends (at the minimum, the one connected to the pitman arm) and I'm having trouble finding anything. I saw there used to be a Moog part but it looks like it doesn't exist any longer. Others have mentioned getting parts from VPW? Does anyone know the part number for those? Are there any standard tie rod ends that fit with a 715? If I get replacement tie rods, it probably wouldn't be awful either. I think one is bent anyways. thanks for the help all!

Memphis equipment had them a couple of years back but I do not see them on their website but it might be worth a call if VPW does not have them.

I got mine from VPW; apparently they have a bunch of tie rod assemblies they just pull the ends off.

Quote:

---

Originally Posted by Nailhead

I got mine from VPW; apparently they have a bunch of tie rod assemblies they just pull the ends off.

---

Yeah, I got ahold of them. They still have tie rods.

Although, now I'm thinking that I might just make my own... just have to figure out if you need special tie rods or if i can use 1 ton tie rod ends. I was looking at this kit.

https://www.ruffstuffspecialties.com...STAND-KIT.html
https://www.ruffstuffspecialties.com...R1531-full.jpg

I replaced my right passenger side, moog number Es235r with an exact replacement. It s for a Case 100 hydro tractor part number 384006r1. I bought it from yesterday’s tractor. Cost about $30.00 plus shipping 3+ years ago. That moog number also crosses to Eaton - te2010 and ac delco - 45a0015. For the right side. Scott.

Quote:

---

Originally Posted by Scott in Ct

I replaced my right passenger side, moog number Es235r with an exact replacement. It s for a Case 100 hydro tractor part number 384006r1. I bought it from yesterday’s tractor. Cost about $30.00 plus shipping 3+ years ago. That moog number also crosses to Eaton - te2010 and ac delco - 45a0015. For the right side. Scott.

---

Thanks for the info!I'm going to try to find those numbers. I would rather have new components than parts pulled off another truck from VPW.

For reference for anyone looking at this, I found AC Delco part numbers that look like they should work. They match as a cross reference in their catalog to the Moog ES235R/L numbers. here's what I found:

Driver's side - 45A0014 / 88909848
Passenger side - 45A0015 / 88909849

Quote:

---

Originally Posted by Old_Red_Jeep

Thanks for the info!I'm going to try to find those numbers. I would rather have new components than parts pulled off another truck from VPW.

---

They're NOS parts, not take-offs.

Cross for 235R/235NR

Code:

---

Eaton TE2010
Navistar 127242R91
Navistar 263499C91
Perfect Circle 269-2052
Sealed Power 802-235R
TRW ES235NR
ACDelco 45A0015 / 88909849
TRW L18SV5452A14
TRW L18SV5452A12
International Harvester (IHC) 263499C91
Dana Commercial Vehicle Service Parts 269-2052
International Harvester (IHC) FTR235NR
American Motors Corp (AMC) 0943685
American Motors Corp (AMC) J0943685
Case Tractor 384006R1

---

Cross for 235L/235NL

Code:

---

FEDERAL MOGUL ES235L
TRW ES235NL
FLAGG ES235L
MOOG ES235L
ACDELCO 45A0014 / 88909848
AUTOMANN 462ES235L
DANA SP692051
DAYTON PARTS BATCO 310129
EATON TW209
SPICER SP692051
O AND S MFG. ES235L
FEDERAL MOGUL ES235NL
TRW L18SV5453A12
FLAGG ES235NL
MOOG ES235NL
FEDERAL MOGUL L28SV5000A39
TRW L28SV5000A39
AXLETECH R230006

---

I just got the Case Tractor 384006R1 off ebay for about $30 ea.
The other side, the cheapest I could find is TRW ES235NL for $49.99 ea

We got four tie rods from our local Claas dealer (farm equipment). He took the measurements from the old ones. I hope they were correct lol. They got f*cked up because the previous owner put them in upside down... Did not see any receipt though so can't give you a part no. Think I paid 150 euro for four pieces.