binfordm715 : Time for USMC stencils

Time for USMC stencils
Post by binfordm715 on Aug 24, 2006, 2:35pm

I'm going with stencils since A) my hood will be replaced in the not-too-distant future and B) I like the stencil look better!

Being USMC green, I'm going with the USMC stencils. Already picked my hood numbers: USMC 42908 (the numbers are the license plate number of the Collector Vehicle plate I got for it).

Questions:

1) Single line on each side of the hood?

for instance:

USMC 42908

as opposed to:

USMC
42908

2) Semi-gloss yellow? (Any source for a near-correct shade in semi-gloss?)

3) Same "USMC 42908" on the tailgate under the "JeeP" right?

4) What do USMC trucks of this era have on their front bumpers/rear bumperettes?

5) What other markings do USMC trucks have? (TP? Gas filler warnings, etc.?)

Know any source of pics I could look at that are known to be fairly correct?

Thanks!

Re: Time for USMC stencils
Post by socal715 on Aug 24, 2006, 2:50pm

The army stencil are two lined. I don't know about the Marine version. As far as pic go of a Marine version 715.... i think they're extremely rare. So rare , ive never seen one.

Re: Time for USMC stencils
Post by porkchop on Aug 24, 2006, 3:04pm

My truck has the correct markings on it. the USMC and ht enumbers are single lined. Also the Marines used 6 numbers at that time. 5 numbers were used during Korea. Beast makes all the stencils for $25. That includes the front bumper, bumperettes, hood, tire pressure, and filler caution. I will send you some more pictures of my truck when I get home.

http://i35.photobucket.com/albums/d1.../porkchop9.jpg

You can also see more pictures on beast's (David Allen) web site.

Re: Time for USMC stencils
Post by binfordm715 on Aug 24, 2006, 3:39pm

Already talked with Beast. He says he's been doing the stickers since the stencils are a PITA. I'd like to just paint the stuff on since I'll be (hopefully) replacing the hood anyway. Besides, there's just something oh-so "military" about stenciled numbers!

I remember you told me about the 6 digits, but I'm going to stick with the 5 that are on my license plate 'cause after all, I'm just a dork and everything....

Looking forward to more of your pics! I don't recall seeing it since you put the bumper numbers on and don't think I ever saw a rear-view.

So, what are the height of the stickers then, so I can see about getting some stencils.

And Sally....were those stencils reusable? I'd hate to get stencils instead of stickers because of replacing my hood, only to find they're only one-time-use stencils!

Re: Time for USMC stencils
Post by elwenil on Aug 24, 2006, 3:42pm

If you look for pics of Lee's old truck, it also had Marine markings. I believe they were stenciled by the look of them. There are a few outfits on the net that do custom stencils for MVs.

Re: Time for USMC stencils
Post by beast on Aug 24, 2006, 4:16pm

Yep, Porkchop's are decals, not stencils. I can be forced to make stencils, but they are a pain. The stencils are usually a one time shot. Rick Larson has reusable oil boards if you want to be able to do it twice. Hood # are 3" front bumper are 4", tailgate 1.5" TP & cautions are 1"

Re: Time for USMC stencils
Post by k8icu on Aug 24, 2006, 8:28pm

Your going to laugh but traffic marking paint. The rattle cans that you can use to put lines in the parkinglot. The color is just about perfect. The hard part is holding the can (upside down) to paint.

Re: Time for USMC stencils
Post by porkchop on Aug 24, 2006, 8:47pm

The color that is a dead on match is hobby paint yellow. The kind you can find at the hobby store.

Re: Time for USMC stencils
Post by k8icu on Aug 25, 2006, 7:45am

That would be easier than holding and upside down traffic marking can...

Re: Time for USMC stencils
Post by k8icu on Aug 25, 2006, 7:46am

PC what is the color number do you know? Or the FSN for it?

Re: Time for USMC stencils
Post by porkchop on Aug 25, 2006, 9:45am

Yellow Semi-gloss - 23538. Is the actually military paint.

I found this while playing with google, Old Caterpillar Yellow is the nearest known civvy colour to USMC yellow, being only a few parts-per-million different.

http://www.internationalhobby.com/ih...temCode=GUH004 Is a good place for the semi-gloss yellow.

Re: Time for USMC stencils
Post by binfordm715 on Aug 25, 2006, 4:57pm

Excellent info! Thanks, guys!

Re: Time for USMC stencils
Post by binfordm715 on Aug 28, 2006, 2:13pm


Quote: <TABLE class=bordercolor cellSpacing=1 width="90%"><TBODY><TR><TD width="100%"><TABLE class=quote cellSpacing=0 cellPadding=2 width="100%"><TBODY><TR><TD width="100%">Yep, Porkchop's are decals, not stencils. I can be forced to make stencils, but they are a pain. The stencils are usually a one time shot. Rick Larson has reusable oil boards if you want to be able to do it twice. Hood # are 3" front bumper are 4", tailgate 1.5" TP & cautions are 1"
</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>


So.... You could be talked into stencils, eh? If you could be talked into it, what would you want for two sets of the same numbers? Then when I replace the hood and bumper, I'd have the spare set.

Probably wouldn't need a separate TP or fuel cautions though....

Re: Time for USMC stencils
Post by beast on Aug 28, 2006, 3:08pm


Quote: <TABLE class=bordercolor cellSpacing=1 width="90%"><TBODY><TR><TD width="100%"><TABLE class=quote cellSpacing=0 cellPadding=2 width="100%"><TBODY><TR><TD width="100%">
Quote: <TABLE class=bordercolor cellSpacing=1 width="90%"><TBODY><TR><TD width="100%"><TABLE class=quote cellSpacing=0 cellPadding=2 width="100%"><TBODY><TR><TD width="100%">Yep, Porkchop's are decals, not stencils. I can be forced to make stencils, but they are a pain. The stencils are usually a one time shot. Rick Larson has reusable oil boards if you want to be able to do it twice. Hood # are 3" front bumper are 4", tailgate 1.5" TP & cautions are 1"
</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>


So.... You could be talked into stencils, eh? If you could be talked into it, what would you want for two sets of the same numbers? Then when I replace the hood and bumper, I'd have the spare set.

Probably wouldn't need a separate TP or fuel cautions though....</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>

Give me a day or two to figure out how much more it will take in material to do it in stencils. I'll shoot you a price then.

Re: Time for USMC stencils
Post by binfordm715 on Aug 28, 2006, 3:47pm


Quote: <TABLE class=bordercolor cellSpacing=1 width="90%"><TBODY><TR><TD width="100%"><TABLE class=quote cellSpacing=0 cellPadding=2 width="100%"><TBODY><TR><TD width="100%">

Give me a day or two to figure out how much more it will take in material to do it in stencils. I'll shoot you a price then.

</TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>

You bet. Thanks!

Re: Time for USMC stencils
Post by binfordm715 on Sept 5, 2006, 4:09am

Whaddya think there, Beast?

I'd be good for two sets of front bumper stencils and two sets of hood stencils, assuming they're not re-usable. And the TP, fuel warning, bumperettes, tailgate, etc. (Does the USMC have the yellow 4 on the passenger door too? Regardless, I want one there. They look cool.)

Oh, and I'd prefer the front bumper stickers be 3" instead of 4". Should make it easier for you anyway since they'd then be copies of the hood numbers, eh?

Lemme know if you can do. Thanks, man...

Re: Time for USMC stencils
Post by beast on Sept 5, 2006, 9:11am

Sorry, I have not forgot about you, but the holiday weekend is one of the busiest of the year for me here at the race shop. I get you figured out today now that the crowds have gone home.

Re: Time for USMC stencils
Post by binfordm715 on Sept 5, 2006, 11:06am

Cool. I don't mean to be pushy.

What do the USMC trucks put on the bumperettes?

Re: Time for USMC stencils
Post by beast on Sept 5, 2006, 12:47pm

Sent you a PM. As far as bumperettes, I don't believe that they had anything on them, but I include them in case you want to put them on like Gunny did.