Mike's Restoration Thread, "The List", Current Progress...

Printable View

August 25th, 2008, 10:59 PM
BubbaWilkins

Mike's Restoration Thread, "The List", Current Progress...

Current State: In the driveway. :cool:

http://img520.imageshack.us/img520/727/p8250002bq3.jpg

I spent some time going over the truck and now have an idea of what I need/want to do with it.....

The List

1. Switch Title to Texas and Register as Former Military Vehicle.
2. Fix right rear hub seal. :yes:
3. Fix Fuel Gauge and check Fuel Pressure Gauge.
4. Replace Tachometer.
5. Replace Transfer Case Seals and paint.
6. Recondition Transmission Seals and paint.
7. Recondition Ranger Overdrive Transmission and paint.
8. Clean and paint Drive Shafts.
9. Clean and paint underside and frame (possibly Rhino-line).
10. New Canvas Top
11. New Seats.
12. Rhino-line & Paint Cab floor.
13. Rework all the miscellaneous switches (this deserves a sublist)
a. Light Bar. 24v
b. Lower Drive Lights. 12v
c. Fog Lights. 12v
d. Back-Up Floods. 12v
e. Headlights. 12v
f. Overhead Cab Interior Light
14. Tires and possibly wheels as well.
15. Adjust Parking Brake.
16. Replace Headers and Exhaust.
17. Straighten Fenders.
18. Rhino-line and paint Wheel Wells.
19. Paint bumpers (likely black).
20. Add new fuel cans, prospecter tools, and associated straps.
21. Paint Bed (Interior).
22. Paint Exterior. (OD Green, USMC standard markings)
23. Paint Cargo Railings (black)
24. Adjust PTO and Winch levers.
25. Replace missing shift nobs on PTO and Winch levers.
26. Replace valve cover gaskets.
27. Replace oil pan gasket.

And some possible further work that I have yet to decide....:eek:

1. Overhaul AMC 360 completely OR convert to modern diesel power plant.
2. Rework entire electrical wiring system from scratch.

I'll periodically update this thread with pictures and progress.
August 25th, 2008, 11:07 PM
BubbaWilkins

Bah, just figured out the indent thing when the time limit to edit expired...
August 26th, 2008, 10:01 AM
Snuffy

Have the fender mender just about complete. I'll be done with it in a couple of weeks. Need it?

-Snuffy

I have has a piece of flat bar (3/8"X8"X7') rolled to fit inside the fenderwell. I'm putting support (11 ga. sheet and some tubing) inside it next week. All you will have to do is pull the wheel, set the mender inside the wheelwell and jack it into place. No jacks provided. I also have a cover that can go outside (on top of the fender) that is clamped into place as needed.
August 26th, 2008, 10:25 AM
BubbaWilkins

That might come in handy. When your done, let me know and we'll work out the details.

I was thinking about making a pair of 4x4 blocks with the proper contour, adding 3'-4' handles and some heavy duty clamps. Yours sounds like it might work better though.
August 26th, 2008, 10:42 AM
k8icu

"check Fuel Pressure Gauge." "Replace Tachometer"

Where these gauges added to your truck. A stock M715 has 5 gauges. Speedometer, Oil Pressure, Fuel Level, Engine Temp., and Voltage gauge. Do you have two extra gauges or have you just miss identified two of the stock ones? Not picking on you just wondering.

#13...is the truck converted to 12V or is it still 24 and you want to change it to 12v? If going to or already is 12V why would you want to make the light bar 24v? I'm not following your thinking. It sounds like you might be better changing #13 to your #2 future work.
August 26th, 2008, 11:21 AM
BubbaWilkins

I have two gauge clusters and two electrical systems with seperate alternators and batteries.

http://i428.photobucket.com/albums/q...20cab20001.jpg http://i428.photobucket.com/albums/q...20cab20002.jpg

The 12v system runs the ignition, headlights, drive lights, fog lights, left gauge cluster, fuel pump, and parking lighting.

The 24v system runs the right cluster, Top light bar, back-up floods, large trailer hook-up, indicator lighting (signals and brakes). At one time, there was a second fuel tank which is why you see two fuel gauges. The filler tube remains, but the tank had developed a leak some years ago and was removed.

Most of this was done when the 360 was swapped in and it was likely easier to add the 12v stuff as needed than to completely rewire the whole truck.
August 26th, 2008, 09:48 PM
k8icu

Wow...how....interesting.....
August 26th, 2008, 10:05 PM
randyscycle

Looks like an airplane cockpit in there! :D

Neat though, never seen anything done that way, but should keep thing interesting for a while.

Oh and your list looks wayyyyy too short....Mine started like that and a year and a half later I am still adding things to it.
August 26th, 2008, 10:22 PM
BubbaWilkins

haha. Well I did consider adding a few more items to the list today....possibly a new steering column for instance. Funny you should say that, my boss who is a former Air Force pilot said it reminded him of the T-38 cockpit.
August 26th, 2008, 10:23 PM
randyscycle

A bank of about 15 toggle switches overhead would kinda' round out the package!
August 26th, 2008, 10:30 PM
randyscycle

Here's my "cockpit":

http://img228.imageshack.us/img228/9...terior2ni4.jpg
August 26th, 2008, 10:55 PM
BubbaWilkins

Very clean looking ride there...

but your missing pedals and levers!:D
August 27th, 2008, 09:36 AM
Roy

looks good Randy
August 27th, 2008, 01:04 PM
bluesman2a

Quote:

Originally Posted by randyscycle

A bank of about 15 toggle switches overhead would kinda' round out the package!

Check...

http://www.sjmembers.com/gallery/alb...0/DSCF0759.jpg
August 27th, 2008, 01:14 PM
BubbaWilkins

Very nice install there as well!
August 27th, 2008, 06:20 PM
randyscycle

Quote:

Originally Posted by BubbaWilkins

but your missing pedals and levers!:D

I don't miss 'em either!
August 29th, 2008, 08:44 PM
BubbaWilkins

Current State: Street Legal.

Adjusted the e-brake the other day and took it down to the local quick lube to get a safety inspection. I won't need another inspection because I did get it registered as a Former Military Vehicle, but the inspection was required to get the Title transferred to Texas. Put a temporary coat of paint and the new markings on so I can continue to drive it.

http://i428.photobucket.com/albums/q...s/P8290004.jpg

The List

1. Switch Title to Texas and Register as Former Military Vehicle. :yes:
2. Fix right rear hub seal. :yes:
3. Fix Fuel Gauge and check Fuel Pressure Gauge.
4. Replace Tachometer.
5. Replace Transfer Case Seals and paint.
6. Recondition Transmission Seals and paint.
7. Recondition Ranger Overdrive Transmission and paint.
8. Clean and paint Drive Shafts.
9. Clean and paint underside and frame (possibly Rhino-line).
10. New Canvas Top
11. New Seats.
12. Rhino-line & Paint Cab floor.
13. Rework all the miscellaneous switches (this deserves a sublist)

a. Light Bar. 24v
b. Lower Drive Lights. 12v
c. Fog Lights. 12v
d. Back-Up Floods. 12v
e. Headlights. 12v
f. Overhead Cab Interior Light
14. Tires and possibly wheels as well.
15. Adjust Parking Brake. :yes:
16. Replace Headers and Exhaust.
17. Straighten Fenders.
18. Rhino-line and paint Wheel Wells.
19. Paint bumpers. Gonna be OD Green so markings can be black.
20. Add new fuel cans, prospecter tools, and associated straps.
21. Paint Bed (Interior).
22. Paint Exterior. (OD Green, USMC standard markings)
23. Paint Cargo Railings (black)
24. Adjust PTO and Winch levers.
25. Replace missing shift nobs on PTO and Winch levers.
26. Replace valve cover gaskets.
27. Replace oil pan gasket.

And some possible further work that I have yet to decide....:eek:

1. Overhaul AMC 360 completely OR convert to modern diesel power plant.
2. Rework entire electrical wiring system from scratch.
3. New Steering Column with tilt.
4. Hidden Radio Installation.
5. Possible overhead switch/radio console.
6. Cab Roll Cage.
September 2nd, 2008, 04:44 PM
wrecker

The truck looks good Bubba! I agree though, that list will grow and grow...

Randy, What type of bracket did you fab for your parking brake/xfer case shifters? I'm thinking of using an auto in my other truck.
February 2nd, 2009, 06:20 PM
BubbaWilkins

Been a while since I updated the thread, so here goes:

Really haven't done much to it as I've been too busy using it for hauling stuff or just driving it around on the weekends.

I did have an issue with header bolts on #8 (up against firewall) coming loose and falling out at a stoplight a month or so ago. Nothing will make your heart stop like hearing a sharp "PING" as your sitting there waiting for the light to change. Fortunately, was a cheap fix and managed to get some new ones in with some effort and allot of patience.

As posted in the other thread, I picked up a set of (5) H1 tires that were listed as 65%-70% tread life on the cheap off ebay. They are currently in the garage waiting for the re-centered H1 rims to arrive in the next week or so.

Other things I have bought or ordered that are on the way:

NP205 out of a 69 IH.
New Stewart Warner Tachometer, Fuel Guage, and Fuel Sending Unit. Heavy Duty series are almost identical to the original gauges.
New Top from Surplus City (Tried NewLife, but never got a response out of them + Surplus was ready to go)
A pair of Corbaeu Moab seats.

I'll post pictures later!
February 2nd, 2009, 11:14 PM
scottsmyth

If you decide to go with new wheels, would you be willing to sell the ones that are on it now?
February 3rd, 2009, 12:15 AM
BubbaWilkins

Quote:

Originally Posted by scottsmyth

If you decide to go with new wheels, would you be willing to sell the ones that are on it now?

I'll be posting them in the for sale section in a week or two when the new ones arrive.
January 27th, 2011, 04:24 PM
militarypotts

That dash has to be one of kind. It will surely cause some curiosity. Do all the guages light up?