I thank the guys who posted photo and size of the exhaust support, they will recognize each other.
I drove it today, the brake system is not leaking but it is not still braking.
https://i.imgur.com/LNZN6fA.jpg
https://i.imgur.com/rxG9kcE.jpg
Printable View
I thank the guys who posted photo and size of the exhaust support, they will recognize each other.
I drove it today, the brake system is not leaking but it is not still braking.
https://i.imgur.com/LNZN6fA.jpg
https://i.imgur.com/rxG9kcE.jpg
Again, very, very nice. Thanks for saving this piece of history!
You have done a fabulous job! Very impressive!
Its amazing...you go through every single part is seems and restore it...you have great skill!
Thank you to all of you for your attentions.
In anticipation, below in pictures.
https://i.imgur.com/U3ZnPVs.jpg
https://i.imgur.com/FFx8tKE.jpg
Fantastic work.
Thanks,Quote:
Originally Posted by Mikel
Mikel.
https://i.imgur.com/JTSGh3w.jpg
https://i.imgur.com/o3q4CPe.jpg
https://i.imgur.com/3rC8JyS.jpg
https://i.imgur.com/DXTCkAA.jpg
I start the A again, it didn't have the right space.
The diagram of my installation, circuit breaker and slave receptacle.
https://i.imgur.com/hRTiVjx.jpg
https://i.imgur.com/O61Tjhu.jpg
https://i.imgur.com/iYkgAMt.jpg
The glass is cracked in the middle, it took me a while to realize.
I will have to start over.
https://i.imgur.com/SqF2LrS.jpg
https://i.imgur.com/HhUZ8vI.jpg
https://i.imgur.com/v7EqqFv.jpg
Really nice, thanks for the pictures.
The truck is looking great! I love the different 4-color camo paint you went with instead of the usual Woodland winter patern.
You said "I drove it today, the brake system is not leaking but it is not still braking." Either the brakes are not adjusted correctly or you still have air in the system and need to bleed them some more. Or a combination of both. You may have to go through the system to make sure everything is working properly.
Nothing of the kind.
I am waiting for new brake shoes, the existing ones are worn to the iron.
I will also install a new NOS master cylinder, I like the original stock.
From scratch, the brake system is a long rebuild.
The photo below shows the correct fit and the wear in question.
https://i.imgur.com/BkB5iDy.jpg
One word, "Nice".
Out of four original shocks, two were still in very good condition, one front and one rear.
After renovation and transformation they will be equal to be installed at the back.
https://i.imgur.com/Wp6U2Sz.jpg
https://i.imgur.com/wm5LNyh.jpg
https://i.imgur.com/K469qn7.jpg
https://i.imgur.com/OBa6jwK.jpg
Preparation of the master cylinder and adjustment of the rocker arms.
All original with new jaws, it brakes hard.
https://i.imgur.com/Ewleb7W.jpg
https://i.imgur.com/efcqhIG.jpg
https://i.imgur.com/MSAUtBB.jpg
I enjoyed making a few more or less long journeys with my truck but immobilization is necessary to restore the five rims.
A leak appeared on takeoff.
I think this crack comes from a shock and not from a mechanical stress.
https://i.imgur.com/u2yRCRE.jpg
https://i.imgur.com/YVJKKPG.jpg
https://i.imgur.com/FYCELKi.jpg
https://i.imgur.com/tYFiJt8.jpg
you need a 25 kilogram bag for a rim and its ring.
Five bags is the amount of sand I used for the blasting.
https://i.imgur.com/JtQ09Xn.jpg
Provisional instead of the power take-off.
I'm having fun !
https://i.imgur.com/1FD1HNh.jpg
https://i.imgur.com/DRpYEss.jpg
https://i.imgur.com/vulZ47J.jpg
https://i.imgur.com/sZgMWnx.jpg
Fantastic work :cool:
thank you,Quote:
Originally Posted by Mikel
Mikel.
An encouragement for the three remaining wheels.
https://i.imgur.com/7g9goVZ.jpg
https://i.imgur.com/5fBZWNU.jpg
You may be wondering, yes the wheels on the hubs are interchangeable.
https://i.imgur.com/5kpJdRr.jpg
https://i.imgur.com/7LsMDxY.jpg
Your work has created an amazing transformation!! Absolutely beautiful job!
The first photo I received from the truck.Quote:
Originally Posted by kyken
It's the same bumper.
https://i.imgur.com/kMKWcpo.jpg
https://i.imgur.com/CxBn0cF.jpg
https://i.imgur.com/muZheOq.jpg
https://i.imgur.com/7QnIPmG.jpg
https://i.imgur.com/UJ4eQkU.jpg
https://i.imgur.com/9KClcz6.jpg
https://i.imgur.com/bUNFGNT.jpg
Looks so awesome! Great Job!- gonz
Looks awesome in that camo! So unique.
Yes, I really like.
Strobe light for timing with cable and civilian spark plug.
Digital tachometer for RPM.
https://i.imgur.com/hzySYV7.jpg
https://i.imgur.com/H3y68nq.jpg
https://i.imgur.com/Xm943Ox.jpg
It is not high fashion but it will be tailor-made.
https://i.imgur.com/27BKnN0.jpg
Hi Frédéric, did you already install the window wipes in the pictures above? It looks like you just put it up to the window for a picture. Now I see yours bend upside, mine bend down.
Verzonden vanaf mijn iPhone met Tapatalk
Hello,Quote:
Originally Posted by Jasperzigterman
Yes they are installed indoors and outdoors.
Check out the latest photos on page 15.
Oké! I think mine are a little bit different then. The lip on mine goos down, while yours go up. Yours will keep the water out better probably.
Verzonden vanaf mijn iPhone met Tapatalk
Open a post Zasperzigterman
and present your Jeep to us, we love the photos of our trucks, whatever their condition.
Hij Frédéric, I’m sorry for spamming your topic. I just wanted to know about the window wipes since I debated on getting them at BJsOffroad or somewhere else.
Just wanted to let you know I follow your build with great interest since you are also in Europe just like me.
I think I’ll post some before and after pictures when my Jeep is finished.
Looks nice, before you sew the rain gutter on your canvas you might want to research the position of it, the original does not have a steep angle. There is a member here Al who has a nice picture gallery, take a look and you will see how the gutter should look like.
http://www.m715zone.com/vb/pages/gal...temple/al.html