thanks
those are custom spring hangers. i made them myself.
Printable View
thanks
those are custom spring hangers. i made them myself.
Well had a fairly good go at it this weekend. The rear axle was cut out and fitting the new axle began. The 14 bolt was finished with pressing the wheel studs and rotors for the disc conversion.
http://i87.photobucket.com/albums/k1...r/discconv.jpg
http://i87.photobucket.com/albums/k1...or/disc14b.jpg
Once the rear axle was done, it was mockup time for the truck. It took several hours of measuring and recheck to make sure everything was a go. The run down on parts being used are 52 inch leaf springs from a p30 delivery van. Shackle mounts from the same van. The inside of the frame will be plated to hang everything.
Bare frame rear
http://i87.photobucket.com/albums/k1.../rearframe.jpg
http://i87.photobucket.com/albums/k1.../axleframe.jpg
http://i87.photobucket.com/albums/k1...axleframe2.jpg
Oh yes..... I have the caliper mounts on backwards for the curious.
Well photoboucket is down for a bit.... Ill post up the rest when its back online.
Here are a few of the spring hangers clamped to the frame while final measurements were taken.
http://i87.photobucket.com/albums/k1...esprings-1.jpg
http://i87.photobucket.com/albums/k1...ngmounts-1.jpg
i can't wait to tackle my rear suspension. take lots of pics so i can bug you for them next year, or maybe this winter :)
looking good
Ryan
Seats were delivered today. 283 pounds a piece:eek: G:eek:oing to take the engine hoist to get those in and located when time come.
Ryan,
Ill keep all the pics and measurements. Always happy to help.
Ill get some seat pics up tomorrow when I get to see them.... Im out of town working and its killing me not being there.
Well Santa came ot the office today. Im bored so I thought Id post up what I got. I always get funny looks when the UPS or FedEx man comes. I ve have a transmission, tires, etc shipped to my office to save on freight.
The real funny part is I am a transplant perfusionist so its not a business that has a loading dock or anything to do with anything mechanical. I open boxes with joy and my coworkers just shake their heads.
Yukon 4340 35 spline stubs!
http://i87.photobucket.com/albums/k1...onor/stubs.jpg
21 Circuit wiring harness. Its blacked out so it soesnt look like a Skittles explosions under the dash. Its still hotstamped every 5 inches in white what each wire is.
http://i87.photobucket.com/albums/k1...ingharness.jpg
Also got a brake proportioning valve with built in brake hydraulic switch.
Now theres a $100 word: perfusionist
Where are the pics of the seats. I can't imagine what seat you got that weights in over 250 lbs without a man in it.
I was thinking the same thing when I read that.Quote:
Originally Posted by kwai
Nice looking build, and I know what you mean about the office/recieving parts/co-worker thing......Too funny!