Printable View
The best is yet to come, Dave.
OK!
I plan to finish the blasting of the frame and the engine, by removing all the peripheries.
So, a small journey of sandbags, combining business with pleasure.
https://i.imgur.com/uekqyTO.jpg
https://i.imgur.com/FJcNwse.jpg
https://i.imgur.com/1d2GGFf.jpg
https://i.imgur.com/82zbmuR.jpg
https://i.imgur.com/uQQ7OyQ.jpg
https://i.imgur.com/uoELIDt.jpg
Looks great, some things I would check, water pump bearing and rear transmission mount, the mount usually has collapsed.
I changed the mount the first week.
The water pump bearing, the engine has been running almost every day for four months, no problem.
Today only one photo.
The painting of the powertrain and the frame is finished.
https://i.imgur.com/3usiy4G.jpg
Nice, good job.
Very, very nice.
Agreed, it sure looks nice!
Thanks guys, glad you like it.
I go up the peripheries, the pipes etc ...
Repair of the pump, the blue plastic membrane worked so far.
To be continued, carburetor.
https://i.imgur.com/ifD6OLS.jpg
https://i.imgur.com/oiqZMPU.jpg
https://i.imgur.com/oghoRAi.jpg
https://i.imgur.com/yeMgajL.jpg
https://i.imgur.com/lyeHTJh.jpg
https://i.imgur.com/LKzr5DH.jpg
https://i.imgur.com/hwKTMQp.jpg
Everything under the horizontal black line must be replaced.
https://i.imgur.com/BeekNSz.jpg
https://i.imgur.com/WIyIzMg.jpg
rough welding
https://i.imgur.com/X8yYC7A.jpg
https://i.imgur.com/BiMukLD.jpg
The welding of the rear cab with the two sides is finished.
https://i.imgur.com/fDNyefi.jpg
Replacement of the door hinge support.
https://i.imgur.com/t5tISCR.jpg
https://i.imgur.com/ViDXhA9.jpg
https://i.imgur.com/AbuX33o.jpg
https://i.imgur.com/qLK8XL7.jpg
Ouch. Your cowl must have been stuffed with leaves for years. Good work!
Those decals are available from this supplier along with the Kaiser warranty decal. http://www.flmv.net/FLMV-DECALS.htm I'm not sure if they will ship over-sea's but you might check.Quote:
Originally Posted by Frédéric
Quote:
Originally Posted by Beast
Maybe Rick Larsen from Militarystencils.com also sells ‘m. I need a few decals too when my restoration has finished. They have this specific M715 decal for example. https://www.militarystencils.com/M71...IONS-P950.aspx
Those decals are available from this supplier along with the Kaiser warranty decal. http://www.flmv.net/FLMV-DECALS.htm I'm not sure if they will ship over-sea's but you might check.[/QUOTE]
Thanks guys.
After welding standing, sitting, lying on the sale and then on the back and with both hands I am happy to spray the first layer of rustproofing.
https://i.imgur.com/RBbMFEg.jpg
https://i.imgur.com/m5xYAFW.jpg
https://i.imgur.com/X8xKyna.jpg
https://i.imgur.com/C0GTT4p.jpg
Looks great, thanks for the pictures.
The sandblast suddenly ended, the compressor belt broke.
Taxi. deposited with a light coat of O.D. paint
https://i.imgur.com/2uPnVJI.jpg
https://i.imgur.com/S21r2F5.jpg
https://i.imgur.com/HPDF9lB.jpg
https://i.imgur.com/Sf9XSCS.jpg
I want to reproduce the stencil on the inner wing but I do not recognize the text.
https://i.imgur.com/OYGk9dD.jpg
First word looks like Antifreeze..
Hi,Quote:
Originally Posted by jhartings
Yes, the warning is for antifreeze.
I compare with my M151a1 but the stencil is different.
https://i.imgur.com/YJhkRmT.jpg
https://i.imgur.com/qR10L4A.jpg
That’s one pretty military truck!
That's looking great!
That’s looking great! Where did you get the shifter boot? Or was it already with the Jeep when you bought it?
Verzonden vanaf mijn iPhone met Tapatalk
Quote:
Originally Posted by Jasperzigterman
The gear lever boot was with the jeep, this rubber has incredible resistance.
Lovely!
First coat of camouflage paint, three are needed.
https://i.imgur.com/cTjkXTW.jpg
https://i.imgur.com/280WzPz.jpg
I try to be one step ahead with stencils.
https://i.imgur.com/DW0VYLc.jpg
https://i.imgur.com/kigTVEv.jpg
https://i.imgur.com/Yo4LYXM.jpg
https://i.imgur.com/EDKUxiX.jpg
That MASSTER Camo is going to look great and so unique. You'll probably be the only one with that type if you ever take it to a military vehicle show.
Cool !Quote:
Originally Posted by Beast
Screw by screw, bolt by bolt.
The second layer of paint is applied, there remains the finishing layer after complete reassembly.
https://i.imgur.com/SCMic13.jpg
https://i.imgur.com/5O4jalh.jpg
https://i.imgur.com/B5ZLYoE.jpg
https://i.imgur.com/iPhJeYJ.jpg
https://i.imgur.com/s1O4Mha.jpg
https://i.imgur.com/Ia1jWQc.jpg
https://i.imgur.com/Nt6U9LL.jpg
https://i.imgur.com/FwjLDNS.jpg
You can see the incomplete seats and I no longer have the solution for them.
I want to build the frames but more plan or model measures.
Two months ago, I found a TM with technical drawings on the driver's seats of the M715 but also of the MUTT, the M37 and the M35 in the same manual.
Well, lost!
Unable to find it, I tried everything.
I found the sticker on the driver's door interior panel.
https://i.imgur.com/StwQxUo.jpg
The tightening of the spark plugs and the exhaust manifold are identical
https://i.imgur.com/JOcmCJ2.jpg
https://i.imgur.com/aYJd5VF.jpg
OME Jeep ZJ rear shock absorber.
I mount it in front of the M715.
the starter rebuilt, I started the engine this evening.
https://i.imgur.com/J9dqnJO.jpg
https://i.imgur.com/henV67Z.jpg
https://i.imgur.com/8nepHOI.jpg
https://i.imgur.com/OArUkyh.jpg
I still haven't found an original seat.
A pair of SOVAMAG seats right now.
I built a support for Black Out.
Tomorrow is a first, the reconstruction of a light switch with three levers.
https://i.imgur.com/gmN6FSq.jpg
https://i.imgur.com/tzRllZZ.jpg
https://i.imgur.com/mmjaDwZ.jpg
https://i.imgur.com/ACToZcX.jpg
Very nice, looking great, I'm sure you will find a set of seats, there were a lot of those trucks in Germany.
May God hear you.Quote:
Originally Posted by m38inmaine
A great emperor and philosopher writes.
"Do not assume, if something is difficult for you, that this thing is impossible for man. But, if something is possible and natural for man, think that it is also within your reach."
Marc AURELE
The braking system is ready for testing and bleeding.
After a few minutes, a leak occurred, thanks to a welding torch, the leak is plugged.
https://i.imgur.com/BkB5iDy.jpg
https://i.imgur.com/LHtwhSe.jpg
https://i.imgur.com/X1Sm7tV.jpg
https://i.imgur.com/EJvqoMA.jpg
https://i.imgur.com/7t7P5Dh.jpg
https://i.imgur.com/TAvNQjY.jpg