Spare tire changing kit for the -715?

Every MV is issued with a "tool" kit for repair and changing tires and it is listed in the -10 operators manual. So if what Jon posted is what the manual says is issued with the vehicle. Then that is what it was. I know M151's were issued a screw type jack, a L shaped lug wrench, a flat blade screw driver, a cressent wrench, and a M151 only wrench that looked like a combo open end and a socket on the other for the drain and fill plugs. It sounds like the M715 was only issued a jack and lug wrench?

Jon can you post the a link to the page in the -10 about the tools?

Click on Manuals up top,
Click on the -10 Operators Manual, first link in the big table at the top of the page,
Scroll the index to the last item in the table: APPENDIX: BASIC ISSUE ITEMS LIST


Or follow this link:
http://www.m715zone.com/vb/view.php?pg=10appendix

Quote:

---

Originally Posted by hiker

I have what I consider is the "original" lug wrench for the truck but how does one prove it. It's an EL shaped lug wrench, black, no part numbers. 3/4 inch diameter bar. The long leg is 2 ft and the other is 10 inches. The lug end is 1" six point. The long end tapers to a flat blade that's tip is slightly concaved?
No camera available for images.
Robert-CA

---

This sounds like the one that came with one of my trucks. The P/O told me it was original so I just took him at his word.

They would need a wrench for the bellhousing fording plug. It is a hex head right? Or is it like a giant wingnut? I made mine so I am not knowing.

The bellhousing fordng plug is a pipe plug...square head.

COMMON TOOLS IN TOOL BAG


5120-223-7397 PLIERS, Slip-Joint, Str-Nose, Comb Jaw W/Cutter, 8" Long (Nom), Phos Finish (Typ-II, CL-2, Sty-A)
1
5120-222-8852 SCREWDRIVER, Flat Tip, Gen Purp, Flared Side, Plastic Hdl, Rd-Blade, ¼ Wd Tip, 4" Blade 7.75" Long. (Nom) 96906-MS 15219-1
1
5120-234-8913 SCREWDRIVER, Cross Tip, Str, Phillips, Plastic Hdl, Pt. No. 2, 4" Blade, 7.5" Long (Nom) 96906-MS 15224-5
1
5120-449-8083 WRENCH, Adjustable, Open-End, Hv-Duty 1.135: Jaw Opng, 9.5" to 10.5" Long, Phos Finish (Typ-I, CL-I)
1
5120-708-3302 WRENCH, Drain Plug, Str-Bar, ½ Sq Plug, 2.5" Lg, Phos Finish. 41-W-1962-100

That stuff is listed a little farther down in the -10

Dave
1967 Kaiser Jeep M715 weapons carrier:http://www.davidallenracing.com/M715.htm
1967 Kaiser Jeep M35a2 2.5 ton cargo truck: http://www.davidallenracing.com/M35A2.htm
Delta Team Decals: http://www.i2k.com/~schwarzd/