I silver soldered a piece of 5/16 copper nickel into the 1/4 elbow, installed a 5/16 hose barb and threaded into the tank, tube is 1/2" off the bottom, no screen. Two short road trips today and the filter was staying full, so far so good.
Printable View
I silver soldered a piece of 5/16 copper nickel into the 1/4 elbow, installed a 5/16 hose barb and threaded into the tank, tube is 1/2" off the bottom, no screen. Two short road trips today and the filter was staying full, so far so good.