Pics of FSJ hood latch

This is a bit old. I did the work a few years ago and posted about it before the big zone crash but never had pictures to post. Sorry if it's been done before.

You can see the standard split in the front of the hood. I bent the latch lever up to sit just under the front edge of the hood instead of rigging that goofy lever down through the cowl.
http://www.arcticoffroad.com/forum/g...5/imgp1042.jpg

The FSJ double latch took care of the flexing so now I can fix the sheet metal.
http://www.arcticoffroad.com/forum/g...5/imgp1043.jpg

The bolts on the driver side mount had to be fished in with a magnet wand.
http://www.arcticoffroad.com/forum/g...5/imgp1044.jpg

The passenger side bolted right on. The safety hook latches too.
http://www.arcticoffroad.com/forum/g...5/imgp1045.jpg

The only hole that had to be drilled was for the latch post on the driver side.
http://www.arcticoffroad.com/forum/g...5/imgp1046.jpg