Printable View
Are these still good for wheel bearing seals?
---------------------------------------------------
All of the bearing #'s are still good.
The seals have apparently been superseded.
These should work...
Front Seal: p/n 475384
Rear Seal: p/n 416282
__________________
Does AB Linn carry both fronts and rears yet? He only has fronts on ebay lately. VPW lists 'bigger and smaller' ones on their listing, but specifically does not say what they fit.
Scott
I have only been able to find the fronts at the usual M715 vendors.
The rear I found at NAPA part number 27601.
Says NAPA on the box as well as "SKF".
SKF Elgin, IL 60123, also SKF.com.
Ken
are there any napa numbers for the fronts?
Fronts and rears are both available from new sources. I have the boxes with part numbers that I used but I'm working on the road right now so I can't tell you what they are. I can say that I found the part numbers on here, so with some searching and calling around you should be able to find them... The numbers you posted look familiar, national/ timken brand I believe.
after some checking i found out napa is gonna be quite a bit more expensive so i'll try ab linn , thanks
There is a National 416282 on ebay now for 15.95 + 2.00 shipping
Do you all remember if this National number is for the front or rear?
National = National Federal Mogul?
I need a front...Thanks!
416282 is the rear.
475384 is the front.
Thank you!